CHANCS Electric Motor 775 12V DC Motor 4000RPM DC 24V 8000RPM with with PWM Adjustable Reversible DC Motor Speed Regulator

*Description: This is a DIY combination of 775 DC Motor and 10A DC Motor Speed Controller. The motor is with ball bearing, large torque, low noise, built-in cooling fan,durable and long service life. The speed regulator can adjust the motor speed, suitable for all kinds of DIY, craft. *The Specifications of the motor: *Rated Voltage: DC 12V, Unloaded Speed: 4000RPM, The Max Torque: 1.2Kgf.cm; Rated Voltage: DC 24V, Unloaded Speed: 8000RPM, The Max Torque: 2Kgf.cm; Power: 80W; The Max Current:12A; Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Type: Single Shaft, Shaft Length: 16mm, Shaft Diameter: 5mm, *The specification of the speed controller: Input Voltage: DC 10V-DC 60V (Ultra wide working voltage); Output voltage: linear under load; Control Power: 0.01-1200W; Rated Current: 10A; Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.); PWM Duty Cycle: 0%-100%; PWM Frequency: 25Khz; Product Size(L x W x H): 77*45*28mm; *Application:Used for electric fan, shredder, sprayer, small cutting machine, small table saw, money counter, printer, etc. *Package include: 1 x DC Motor, 1 x Speed Control *Attention: 1.Please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.This speed regulator is for use with DC brushed motors. It is NOT suitable for speed regulation of DC brushless motors; nor can it be used as a voltage regulator or voltage stabilizer! 3.Positive and negative pole of the POWER and the MOTOR can NOT be reversed.

• *Description:This is a DIY combination of 775 DC Motor and 10A DC Motor Speed Controller. The motor is with ball bearing, large torque, low noise, built-in cooling fan,durable and long service life. The speed regulator can adjust the motor speed, suitable for all kinds of DIY, craft.
• *The Specifications of the motor: Rated Voltage: DC 12V, Unloaded Speed: 4000RPM,Rated Voltage: DC 24V, Unloaded Speed: 8000RPM, The Max Torque: 2Kgf.cm; Power: 80W; The Max Current:12A;Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Type: Single Shaft, Shaft Length: 16mm, Shaft Diameter: 5mm,
• *The specification of PWM: Input Voltage: DC 10V-DC 60V (Ultra wide working voltage); Output voltage: linear under load? Control Power: 0.01-1200W;Rated Current: 10A; Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.); PWM Duty Cycle: 0%-100%; PWM Frequency: 25Khz; Product Size(L x W x H): 77*45*28mm;
• *Package include: 1 x DC Motor, 1 x Speed Control
• *Attention: 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 12V-40V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed controller, it will be damaged if connect the supply voltage with wrong polarity.