Watch Underwater Pressure Tester 10 Bar Professional Watch Waterproof Tester Tool Compact 2 Watches Watch Case Waterproof Pressure Tester Watch Resistant Testing Machine

How to Use1. Pull back the pendant watch lever asfar as possible.2. Loosen the two screws and remove thecover.3. Put in water to reach the designatedred line of the bucket.4. Hang the watch on the pendant watchlever.5. Install the cover and tighten thescrews.6. Shake the pressure rod to reach apressure of 3, wait for three minutes, and let air enter the entire watch.7. Press down the pendant lever andimmerse the watch in water, then press the exhaust button to release the air.8. When the pressure drops, observe theappearance of oil stains and bubbles on the watch. If bubbles appear, itindicates poor sealing of the watch. The hanging watch rod should be quicklyopened and the watch should be removed. If no bubbles appear, it means that thewatch has good sealing.SpecificationColor: SilverMaterial: Glass, Aluminum Alloy,RubberOperation Method: ManualAssembly Required: NoSuitable Watches: Quartz Watch,Mechanical WatchAir Pressure Test Range: 0.3-6.0 barMax. Test Diameter: 6.5cm/2.6inMax. Test Height: 7.2cm/2.8inExternal Air Pressure Connection: 6NMax. Cylinder Pressure: 10 barCylinder Outer Diameter: 8cm/3.2inCylinder Inner Diameter: 6.5cm/2.6inCylinder Height: 13.8cm/5.4inProduct Size:24*14*27cm/9.5*5.5*10.6inPackage Size:27*14*24cm/10.6*5.5*9.5inGross Weight: 4kg/8.82 lbsNet Weight: 3.4kg/7.5 lbsPackage Included1*Watch Waterproof Tester

• Professional Watch Underwater Pressure Tester: This tool has an air pressure test range of 0.3-0.6 bar so that it can simulate different underwater environments, such as daily life waterproof, swimming waterproof, and diving waterproof rating. Moreover, it can test two watches at the same time, which improves efficiency.
• Wide Applicability: Our watch waterproof tester has a maximum test diameter of 2.6in and a maximum test height of 2.8in, which can adapt to most of the mechanical and quartz watches on the market and meet the testing needs of different brands and models.
• Easy to Control: The transparent glass cylinder allows you to see which part of the case is not waterproof, and the large pressure dial makes it easy for you to observe and adjust the pressure at any time.
• Thoughtful Design: The soft rubber handle makes it comfortable to grip and not easy to slip, and the long handle design is ergonomic, allowing you to use it with less effort.
• Space Saving: The watch resistant testing machine, made of premium glass and aluminum alloy, is compact (9.5*5.5*10.6in) and does not take up much space, so you can easily store it in any small corner.